The maintenance and cleaning methods of laminated board mainly include the following aspects:
Avoid bruising and breaking: When using the laminating board, special attention should be paid to avoid collision and fall to avoid damage.
Regular deep cleaning: Carry out deep cleaning once a month, first scrub with a soft towel moistened with water, then scrub with clean water, and then ventilate and dry naturally. If the ventilation and sunlight are not good, you can wipe it with a good quality paper towel.
Maintenance during storage: After removing the mold, the surface of the template should be completely removed to avoid sun and wind, and oil should be applied to the surface during long-term storage, and covered with a rain cloth.
The specific steps are as follows:
Daily cleaning: Use a soft cloth to wipe the surface of the laminate to remove dust and stains. If there is oil, you can use a small amount of dish soap mixed with water and scrub it, but be careful not to scrub with hard objects or detergent balls to avoid scratching the surface.
Deep Cleaning: Carry out a deep cleaning once a month, first scrub the surface of the laminating board with a soft towel moistened with water, and then scrub it with clean water to ensure thorough cleaning. If the ventilation and sunlight are not good, you can wipe it with a good quality paper towel.
Storage and transportation: After removing the mold, the surface of the template should be completely removed to avoid sun and wind. For long-term storage, the surface should be oiled and covered with a rain cloth. During transportation and storage, collisions and falls should be avoided to maintain the integrity and service life of the formwork.