A 12mm Birch Film Faced Plywood is a thin film faced plywood sheet used for concrete formwork, small wall panels, and repair form jobs. The birch and poplar core gives the board a steady body, while the phenolic film helps the surface release from concrete after use. On a busy site, this thickness is easier to carry and trim than heavier panels, so it fits small pours, edge formwork, and temporary boards. The board still needs dry storage, sealed edges, and careful stacking, because poor handling will shorten the reuse time.

Product Parameters

Parameter	Value
Thickness	12mm
Standard size	1220 x 2440 mm / 915 x 1830 mm
Core material	Birch and poplar core by order
Surface film	Brown, black, or red phenolic film
Glue	Phenolic resin / WBP type by project need
Use range	Concrete formwork, wall panel, bridge, tunnel, dam
Turnover reference	About 20-30 times under normal site handling
Edge treatment	Painted edge sealing before packing

Main Applications

1. Small concrete wall panels and beam side formwork.

2. Repair jobs where workers need lighter boards for quick cutting.

3. Bridge, tunnel, or slab edge areas with moderate pressure.

Use Notes

1. The 12mm Birch Film Faced Plywood should have cut edges sealed before repeated use.

2. Keep panels flat and off wet ground after demolding.

3. Use enough support when concrete pressure is not even.

FAQ

Q: Can it be used for high wall pouring?

A: It can be used for light or moderate formwork, but support spacing and concrete pressure should be checked first. The 12mm Birch Film Faced Plywood is not chosen only by thickness.

Q: What should be checked before reuse?

A: Look at film scratches, edge swelling, nail holes, and corner damage before the next pour.

Q: How should it be stored?

A: Stack it flat, keep it dry, and avoid long direct sun before site use.

Hot Tags: 12mm birch film faced plywood, China 12mm birch film faced plywood manufacturers, factory